NOTE: This is a 3.3V Shield, Only Use it with a 3.3V Arduino Variant!Tutorial Can Be Found HERE.Bluetooth
Shield, a serial port Bluetooth module (Mas..
Ever wanted to connect your Arduino or electronics project to a phone or computer over Bluetooth then this is the perfect module for you. The HC-06 bl..
The mega menus use the page builder interface and this means you can add any layout module in your menus to build the desired layout in any rows and columns combination.
Colorduino is a magic RGB LED dot-matrix driver compatible with
Arduino . Colorduino pairs the M54564 with a single DM163 constant
current driver. By using the DM163, Colorduino gains three 8+6-bit
channels of hardware PWM control of the LED's freeing up the MCU from
having to implement it i..
This general USB to TTL module has many uses. This module also includes a DTR pin out connection so you can easily program your Arduino Pro Mini's with out the need to manually reset them. It also features both 3.3V and 5V power sources.Features:
Chipset: CP2102.
USB Connection: USB Micro Female..
This boost/buck converter module is perfect for driving small power loads. It is capable of accepting power from standard USB A, micro-USB or solder pads (3.5-12 V). Its output is adjustable from 1.2-24V DC and is easily changed with the onboard potentiometer with easy to operate knob. The onboard i..
DFPlayer Mini MP3 Player, is a compact and affordable MP3 module with
built in audio output that can directly power speakers. These modules
are very versatile and can either be operated as standalone module with
push buttons or can be interfaced with a microcontroller (such as an
Arduino) .Speci..
This combo features both an ESP-01 ESP8266 WiFi module and a DHT11 Temperature and Humitdity sensor breakout board. This is a quick and easy way to start remote monitoring of temperatures and humidity over WiFi. The breakout board features an onboard power regulator that accepts 3.7-12 V DC for lots..
The
DHT12 is a simple, low cost digital humidity and temperature sensor, it
is an upgrade to the popular DHT11 sensor. The DHT12 is compatible with
the 1 wire interface used with DHT11 and DHT22 but also capable of
communicating over I2CSpecifications:Humidity Range: 20-95% RHTemperature Range: ..
This mini-DIY 18650 power supply module is perfect for creating your own power bank device, simply connect a 3.7V 18650 battery to the Bat+ and Bat- solder pads and you are ready to go
The input to this module for charging is a micro-USB connector accepting 5 V. The output comes from the battery an..
The DS1302 chip contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjus..
This DS18B20 breakout sensor board module is the quickest and easiest way to hook a DS18B20 digital 1 wire temperature sensor up to your ARduino or other electronics project.
The DS18B20 digital thermometer provides 12-bit Celsius temperature measurements. The DS18B20 communicates over a 1-Wire bus..
This combo features both an ESP-01 ESP8266 WiFi module and a DS18B20 Temperature sensor breakout board. This is a quick and easy way to start remote monitoring of temperatures over WiFi. The breakout board features an onboard power regulator that accepts 3.7-12 V DC for lots of powering options. The..