2-3 Days
Model: MV-1665
This compact and affordable USP programmer is perfect for reading and writing 24 series EEPROM devices and 25 series SPI FLASH devices. It has a 16 pin ZIF socket for easy insertion and removal of chips to make sure the legs are not damaged.Supported Chips: (NOTE: ESMT CHIPS READ SUPPORT ONLY NO WRI..
$12.99
2-3 Days
Model: MV-1763
This is a general purpose USB to TTL module. It features a VCC jumper so you can use it on both your 3.3 and 5V devices.Features:Switchable 5V/3.3V powerStatus LEDUSB to TTLVCC, GND, TX, RX Pins..
$2.99
2-3 Days
Model: MV-0382
<p><br>Usb_x000D_
ISP programmer for programming Altera's range of FPGA and CPLD device._x000D_
This programmer is compatible with Altera's Quartus development tools_x000D_
(Use USB blaster in programmer hardware settings).<br><br>Kit includes<br>1 X device<br>..
$11.99
2-3 Days
Model: MV-0910
his
general USB to TTL module has many uses. This module also includes a
DTR pin out connection so you can easily program your Arduino Pro
Mini's with out the need to manually reset them.Features:Chipset: CP2102.USB Version : 2.0USB Connection: A MaleTTL 6 Pin Header:DTRRXDTXDVCCCSTGND500 mA Self..
$5.99
2-3 Days
Model: MV-0509
This
is a compact and convenient module offering both a programming
interface for PICkit 2 and 3 as well as a minimal development
environment for your PIC based projects.Features:LED can be connected to any I/OCrystal Socket can be connected to any pin A Button (do reset key).Complete Pin Br..
$16.99
-50 %
2-3 Days
Model: MV-0285
This
is the module you want if you are programming a stand alone Arduino or
Pro Mini, or most variants when you need an external module. This
module includes break outs for the DTR line for auto reset so there is
no need to try to manual reset the Arduino when loading your program.Features:Genui..
$4.49 $8.99
2-3 Days
Model: MV-0049
Support the most popular PIC chipsNo external power supply neededPICSTARTPLUS much faster rate than programmingAutomatic programming verificationComprehensive information prompts, allowing users to understand the working state.With a 40pin ZIF programming of the seat can directly program ..
$19.99
2-3 Days
Model: MV-0649
NOTE: This is not made by Microchip it is a similar device that is nearly identical and functionally equivalentThis
PICkit 3 compatible device is an in-Circuit Debugger/Programmer it uses
in-circuit debugging logic incorporated into each chip with Flash
memory to provide a low-cost hardware debug..
$44.99
2-3 Days
Model: MV-0129
NOTE: This is not made by KEIL/ARM, however it is fully compatible with all the ULINK 2 Features and FunctionalityThis
ULINK2 compatible Debug Adapter connects your PC's USB port to your
target system (via JTAG, SWD, or OCDS) and allows you to program and
debug embedded programs on target h..
$24.99
2-3 Days
Model: MV-0780
This
is a low cost USB to TTL/Serial cable adapter. Has a break out for VCC(5V),
GND, TX and RX. This can be used to program standalone Arduinos or Pro
Mini (manual reset required as these do not have DTR lines). These can
be used also on Raspberry Pi's for debugging and many other devices
that..
$3.49
-56 %
2-3 Days
Model: MV-0432
This
is a low cost USB to TTL/Serial cable adapter. Has a break out for VCC,
GND, TX and RX. This can be used to program standalone arduinos or Pro
Mini (manual reset required as these do not have DTR lines). These can
be used also on Raspbeery Pi's for debugging and many other devices
that hav..
$1.99 $4.49
-50 %
2-3 Days
Model: MV-0307
Thisis a low cost USB to TTL/Serial cable adapter. Has a break out forVCC(5.0V and 3.3V), GND, TX and RX. This can be used to programstandalone Arduinos or Pro Mini (manual reset required as these do nothave DTR lines). These can be used also on Raspberry Pi's for debuggingand many other devices tha..
$1.49 $2.99